Home Inspection Checklist: What to Check, Ask, and Document Before You Buy
home inspectionsproperty viewingfirst-time homebuyersdue diligencehome buying checklist

Home Inspection Checklist: What to Check, Ask, and Document Before You Buy

HHomebuyer Compass Editorial Team
2026-11-06
8 min read

Use this home inspection checklist to assess major systems, document defects, question the inspector, and plan repairs before closing.

A professional inspection can reveal costly risks, maintenance needs, and safety concerns before you commit to a home. Use this home inspection checklist to prepare for the inspection, record evidence, ask focused questions, and decide which findings require action.

Overview

A home inspection is a visual review of a property’s accessible systems and components. It is not a guarantee that every defect will be found, and it usually does not replace specialist evaluations, such as a structural engineer’s assessment, pest inspection, sewer-scope inspection, chimney inspection, or environmental testing. The exact scope also varies by location, property type, inspection agreement, and professional standards.

For a first-time home buyer, the inspection has two purposes. First, it helps you understand the home’s condition and likely ownership tasks. Second, it gives you information to use during due diligence and, where the contract permits, discussions about repairs, credits, price, or whether to proceed. A report is not a pass-or-fail certificate. Older homes can have long maintenance lists without having a single urgent defect, while a newer home can still contain a serious installation or safety problem.

Before the appointment, read the inspection agreement and confirm what is included, what is excluded, and whether the inspector can access the roof, attic, crawl space, electrical panel, heating equipment, and other areas. Bring your offer documents, seller disclosures if available, and a copy of this checklist. You can also review the mortgage pre-approval and homebuying document checklist so inspection findings are considered alongside the rest of your transaction timeline.

What to track

Start with the property exterior

  • Grounds and drainage: Look for grading that directs water toward the foundation, standing water, eroded soil, damaged retaining walls, and downspouts that discharge too close to the house.
  • Foundation and structure: Note visible cracks, uneven floors, doors or windows that do not operate normally, bowing walls, or signs of movement. A general inspector may recommend a structural specialist rather than determine the cause.
  • Roof and roof drainage: Record the apparent roof age if documented, missing or damaged materials, sagging, flashing concerns, blocked gutters, and stains below roof penetrations. Ask how much of the roof was visible and whether an additional roofing evaluation is appropriate.
  • Exterior walls and openings: Check siding, masonry, trim, exterior paint, window seals, doors, steps, decks, balconies, railings, and visible caulking. Pay particular attention to loose components and areas where water could enter.

Check the major systems

  • Plumbing: Test accessible faucets for flow and temperature, operate toilets, inspect visible supply and drain lines, and look under sinks for leaks, corrosion, or staining. Ask whether the water heater is properly supported, vented, and accessible for maintenance.
  • Electrical: Look for an accessible, labelled service panel, exposed wiring, damaged outlets, missing covers, and outlets near wet areas that may require appropriate protection. Do not remove panel covers or attempt electrical repairs yourself.
  • Heating and cooling: Ask whether the systems responded to normal controls, whether filters and service records were available, and whether the inspector observed unusual noise, leakage, damaged ductwork, or inadequate access. A routine inspection is not the same as a full mechanical performance test.
  • Attic and crawl space: Where accessible, check for insulation gaps, active moisture, staining, damaged framing, standing water, pests, and inadequate ventilation. Record areas that were inaccessible and ask how that limitation affects your understanding of the property.

Review rooms, finishes, and safety

In each room, operate representative doors and windows, check floors and ceilings for visible damage, look for water staining or musty odours, and note cracks that appear unusual or extensive. In kitchens and bathrooms, inspect cabinet interiors, countertops, tile, grout, ventilation, drainage, and signs of repeated moisture. Test built-in appliances if they are included in the sale and the inspection agreement covers them, but do not assume an appliance test predicts its remaining service life.

Safety items deserve their own line in your notes: smoke and carbon-monoxide alarms, handrails, guards, trip hazards, garage fire separation, visible combustion concerns, damaged glass, and unsafe access to stairs or decks. Requirements can vary by jurisdiction and may depend on when the property was built, so ask the inspector which issues are safety concerns and which may require confirmation from the local authority or a qualified specialist.

Keep a defect log

Use one row per finding rather than writing “house needs work.” This makes the report easier to compare with your budget and offer strategy.

Location or systemObserved conditionPriorityNext stepEvidence
Example: rear drainageDownspout releases water beside foundationHigh or mediumAsk for drainage assessment and repair estimatePhoto, report page, inspector comment
Urgent / soon / routine
Urgent / soon / routine

For every item, record whether it is a safety issue, an active defect, deferred maintenance, a potential defect requiring specialist review, or simply an improvement you would choose to make. Keep photos and the report with your transaction documents.

Cadence and checkpoints

Use the checklist at several points rather than only once. The first checkpoint is the property viewing. Look for obvious moisture, drainage, structural, roof, safety, and maintenance clues, but do not treat a viewing as a substitute for professional due diligence. If you are comparing homes, use the same headings for each property so the notes are consistent.

The second checkpoint is before booking the inspection. Confirm the deadline in your contract, select an appropriately qualified inspector, and ask what the inspection covers. Check whether the inspector can access locked areas, utilities, appliances, roof spaces, and crawl spaces. Tell the inspector about concerns you noticed during the viewing, such as staining, unusual odours, recent patching, or doors that stick.

The third checkpoint is the inspection itself. Attend if practical, but allow the inspector to work without interruption. Ask for explanations in plain language and request that important findings be tied to a location in the home. Take your own notes, but rely on the written report for the formal record. Before leaving, ask which areas were inaccessible, which findings need specialist evaluation, and which issues should be addressed promptly.

The fourth checkpoint is report review. Sort findings into three practical groups:

  1. Immediate or high-consequence concerns: Conditions involving safety, active water intrusion, major structural movement, hazardous systems, or a likely threat to the property if ignored.
  2. Near-term maintenance: Repairs that may not make the home uninhabitable but should be planned soon, such as failing seals, drainage improvements, aging equipment, or localized leaks.
  3. Routine and cosmetic work: Items that can be budgeted over time, including worn finishes, minor adjustments, and upgrades that are not necessary to correct a defect.

Do not use age alone as proof that something must be replaced. Ask about observed condition, remaining uncertainty, maintenance records, and the consequence of waiting. For larger concerns, obtain written estimates from suitable trades before deciding what request is reasonable.

Questions to ask the inspector

  • Which findings are safety concerns or could cause significant damage if delayed?
  • Did you observe active moisture, or only evidence of past moisture?
  • What areas or systems could not be inspected, and why?
  • Which findings require a specialist to determine the cause or repair scope?
  • Are there signs of movement, settlement, poor drainage, or water entry that merit further evaluation?
  • Which maintenance tasks should a new owner schedule during the first year?
  • What documents would help clarify the condition, such as permits, invoices, warranties, or service records?
  • Would a follow-up inspection be useful after a repair or before closing?

How to interpret changes

Compare the inspector’s findings with the seller’s disclosures, listing information, permits, invoices, and your own viewing notes. Differences do not automatically indicate dishonesty or a major problem; an inspection may identify conditions that were not visible during a casual viewing. However, a material inconsistency should be documented and discussed with your legal, conveyancing, or real-estate professional according to local practice.

Separate confirmed observations from recommendations for further investigation. “Staining observed” is different from “active leak confirmed.” “Older equipment” is different from “unsafe equipment.” This distinction helps prevent both underreaction and unnecessary demands.

When negotiating, focus on significant defects, safety matters, water management, structural concerns, and systems that materially affect the property’s condition. You may ask about repairs, a credit, a price adjustment, or another contract remedy where available, but the best option depends on the agreement, local rules, lender requirements, and your risk tolerance. Avoid assuming that a credit will cover the eventual cost or that every requested improvement will be accepted.

Update your affordability and cash planning after receiving estimates. Repair costs can affect the reserves you want after closing, not just the purchase decision. The year-one ownership expense planner can help you add immediate repairs to utilities, insurance, taxes, maintenance, and other ownership costs. If the revised budget no longer feels comfortable, revisit your home affordability calculation before waiving contingencies or proceeding.

When to revisit

Revisit this home inspection checklist before every inspection, because each property has different construction, systems, access limitations, and known concerns. Review it again when the inspection report arrives, when specialist evaluations or repair estimates are received, and before an inspection or due-diligence deadline expires. Keep the defect log with your offer and closing files so you can verify agreed repairs and documents.

After closing, convert unresolved findings into a first-year maintenance calendar. Recheck drainage after substantial rain, monitor previously stained areas, service systems according to manufacturer guidance, and record repairs, invoices, warranties, and photographs. A quarterly review is useful for tracking active leaks, seasonal heating or cooling performance, exterior drainage, safety devices, and deferred maintenance. If a new crack, odour, leak, electrical symptom, or heating problem appears, document when it started and seek appropriate professional advice rather than waiting for the next scheduled review.

Before you make an offer on another home, print or copy the defect log and reset the headings. Consistent notes make it easier to compare properties, estimate near-term costs, ask precise questions, and make a decision based on evidence rather than the excitement of a viewing.

Related Topics

#home inspections#property viewing#first-time homebuyers#due diligence#home buying checklist
H

Homebuyer Compass Editorial Team

Homebuying Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.